HARD KORR KOR12-10, Руководство пользователя

Страница: 9 / 10

9
1 Electrical Parameters
1-1 Rated solar panel amps 10/15/20 Max. AMP
1-2 Normal input Solar cell array voltage 15-22 VDC
1-3 Max. solar cell array voltage (output has no load) 25 Max. VDC
1-4 The controller lowest operating voltage at solar or battery side 8V Min VDC
1-5 Standby current consumption at night 5 Max mA
1-6 Maximum voltage drop-Solar panel to battery 0.25 Max. VDC
2 Charging characteristics
2-1 Minimum battery starts charging voltage 3 Min VDC
2-2 Soft start charging voltage 3-10 +/-0.2 VDC
2-3 Soft start charging current (50% PWM duty) Up to 5/7.5/10 AMP
2-4 Bulk charge By the maximum rated current
2-5
Absorption charging voltage at 25 ℃
--Gel type battery 14.1 +/-0.2 VDC
--AGM type battery (default setting) 14.4 +/-0.2 VDC
--WET type battery 14.7 +/-0.2 VDC
--Calcium type battery 14.9 +/-0.2 VDC
--LTO battery 14.0 +/-0.2 VDC
--LFP battery 14.5 +/-0.2 VDC
--Li-ion battery 12.6 +/-0.2 VDC
2-6 Absorption transits to Equalizing or Float condition:
--Charging current drops to
1.5 +/0.1 AMP
-- or Absorption charging timer timed out 4 Hour
2-7 Equalization charging active (Only for WET or Calcium battery)
--Battery voltage discharged to less than
10 +/-0.2 VDC
--Automatic equalizing charging periodical 28 Day
2-8
Equalization charging voltage at 25 ℃
15.5 +/-0.2 VDC
2-9 Equalization charging timer timed out 2 Hour
2-10
Float voltage (GEL, WET, Calcium, AGM battery) at 25 ℃
13.8 +/-0.2 VDC
Restart voltage for LTO battery 13.2 +/-0.2 VDC
Restart voltage for LFP battery 13.4 +/-0.2 VDC
Restart voltage for Li-ion battery 12.0 +/-0.2 VDC
2-11 Voltage control accuracy +/- 1%
2-12 Battery temperature compensation coefficient -24 mV/*C
2-13 Temperature compensation range -20 ~
+50
℃
3 Protection
3-1 Against reverse polarity or short circuit at panel or battery
3-2 No reverse current from battery to solar at night
3-3 Over temperature protection during charging 65
℃
4 Electrical parts
4-1 Input output terminal M5 terminals
5 Physical Parameters
5-1 Controller material Plastic, Standard ABS
5-2 Power terminal maximum stranded wire size #10 AWG stranded- 5 mm 2
5-3 Power terminal torque Up to 17 in-lb (0.2n-m)
5-4 Mounting Vertical wall mounting
5-5 IP grade IP65,
5-6 Net weight Approx. 300g
6 Environmental characteristics
SPECIFICATIONS