3
●
Make sure you connect the red to the positive on the battery and the black to the negative
on battery
●
Please double check before you connect, connecting to wrong terminals may burn out the
controller
●
Confirm that the power wires are tightened to the correct torque to avoid excessive heating
from a loose connection.
●
Refer to battery specification, be very careful not to short circuit to the battery connections.
●
Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or
a fire hazard. We recommend that you cover up the panel(s) with some sort of soft cloth so
you can block all incoming light during the installation. This will ensure that no damage is
caused to the Solar Panel or Battery if the wires are accidentally short circuited.
●
Always install a battery fuse on each circuit including the solar controller
- PWM technology, switching control by MOSFET
- Common negative grounding connection
- High efficiency and low power consumption
- Battery type setting and battery condition indication
- Smart charging control
- Charging time management
- LED indication for the battery condition and charging statues
- Digital display charging parameters and battery settings
- Automatically active to Lithium battery against BMS protection
- Thermal protection
- Over voltage protection, Short circuit protection, Reverse polarity protection
- No sparks
- Water proof
- Solid-duty cables
- Corrosion-resistant terminals and connectors
.
- Conformal coating supplied to the inside board against moisture
- Includes a port for external battery temperature sensor (BTS - optional).
- Suitable for most of the rechargeable Lead acid battery, including Flooded (WET),
AGM, GEL, Calcium battery and Lithium batteries.
- Designed according to CE standard, EMC, FCC compliance.
The Solar Controller can be mounted as shown below.
The quickest and easiest way to mount the unit is to use the four plastic spacers and
self-tapping screws supplied and mount the unit to a flat surface,
FEATURES AND ADVANTAGES
INSTALLATION
