Page 4
SKU 96695
For technical questions, please call 1-800-444-3353.
spEciFicAtiONs
Material
Galvanized steel posts, rails and hardware. Zinc
plated chain link fabric and aluminum gate corners.
Overall Dimensions
74” L x 74” W x 48-3/8” H
Interior Dimensions
70” L x 70-1/2” W x 48” H
Weight
76.6 lb.
uNpAcKiNG
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
AssEMbLy
read the ENtirE iMpOrtANt sAFEGuArDs section at the beginning of
this manual including all text under subheadings therein before set up or
use of this product.
Note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
FrAME AssEMbLy
Decide on a large enough area to assemble the Dog Kennel. It should be on a
flat, level surface able to support the weight of the Kennel and the dog(s) shel-
tered inside it.
Lay out four Corner Frame Rails (2) and connect the tapered ends to the corner
ends, making a square base. See
Figure A
, below.
Do the same with the remaining four Corner Frame Rails (2) to create the top
frame.
please note:
The tapered connections on the base frame should align
with those on the top frame.
1.
2.
3.
Corner Frame Rail
(2) with tapered end
Corner Frame Rail
(2) with corner end
Figure A
