SKU 91771
For technical questions, please call 1-800-444-3353
3.
The Solar Panel has two foldable
legs on the back to help you
position it for maximum exposure
to sunlight. There are additional
tabs on the back of the Solar Panel
to hang it in a window or other
location to receive sunlight.
NOTE: Initial charging time required
using the Solar Panel is 12 hours in
direct sunlight. Subsequent charging
time is 8-12 hours depending on the
amount of use of the lantern and the
strength of the sunlight. When the
lantern is in use on a regular basis, you
should make practice of placing the
solar panel in direct sunlight each day to
recharge the internal battery. NOTE:
There is a wire compartment with cover
to store the solar panel wire when not in
use.
The Solar Panel has a connecting wire
which is stored in a compartment
underneath the Solar Panel. To expose
the wire, open the compartment by
pushing the tab as marked. To store the
wire, fold it up and press it into the
storage compartment. Close the
compartment cover as marked.
Charging the Lantern using an AC/DC adaptor
You can charge the internal rechargeable battery using an AC/DC adapter (not included).
1.
Be sure both the lantern switches are turned OFF. Plug the adapter end of the
AC/DC adapter into the receptacle at the bottom of the lantern. Plug the power
plug cord of the AC/DC recharger into a circuit-breaker protected 110-120VAC outlet plug.
2.
The Charger LED will light up as the lantern is charged. Once charged the
LED will turn off. When the “Charging” LED turns off, your lantern is fully
charged, and the AC/DC charging unit can be disconnected from the lantern.
NOTE: The Solar Charger and the AC/DC charger are exclusive, so that if the
AC/DC charger is used, the Solar Panel will automatically stop charging to
prevent double charging the battery.
Page 6
Solar Panel Legs
Solar Panel Wire
and Spare Bulb
Compartment
