SKU 91771
For technical questions, please call 1-800-444-3353
Operation
Prepare your lantern for use by installing and charging the batteries.
NOTE: Whenever replacing or charging the batteries, the lantern lights should be
“OFF”. The LED “charging” light will be illuminated during any charging operation.
Install six (6) standard “C” cell batteries in the battery compartment.
1.
To do this, first remove the solar
panel as discussed below.
2.
The standard “C” cell battery
compartment cover will be visible.
Pull back the clip and remove the
battery compartment cover.
3.
Install six “C” cell batteries, following
the polarity markings in the battery
compartment.
4.
Replace the battery compartment
cover. Replace the solar panel.
Charging the internal battery using the solar panel
You may charge the internal rechargeable battery, using the solar panel. The solar
panel charges the battery automatically whenever it is exposed to sunlight, whether
it is attached to the lantern or detached. NOTE: Whenever the internal rechargeable
battery is being recharged, the “Charging”
indicator light will be lighted.
1. To do this, simply position the solar panel
in direct sunlight. You may want to detach
the solar panel, to more conveniently place
it in direct sunlight. NOTE: The Solar Panel
is water resistant, so it may be placed
outside in inclement weather, while leaving
the lantern itself indoors, connected only by
the charging wire.
2. To remove the solar panel, turn the two
mounting clips at the top toward each other,
then lift the panel upwards.
Page 5
Solar Panel
“C” cell battery
compartment
Solar Panel
Mounting Clips
