![background image](http://html.mh-extra.com/html/harbor-freight-tools/90792/90792_assembly-instructions_596654004.webp)
SKU 90792 PAGE 4
4.
Lift the assembled Vertical Supports (7 & 8) (right and left), with the Spindle (9) in place.
Place assembly inside the Well Base (10). Align the two holes in each of the lower Vertical
Supports (8) over the Bolts (3) which should be protruding on the inside of the Well Base,
using assistance if neccessary. Use Nuts (6) on the Bolts (3) and tighten Nuts inside of the
Well Base. See
Figure C
Note:
If the predrilled holes are not drilled all the way through the wood, use a drill to clear them.
5.
Secure the Rooftop with Support (11 & 12) to each of the Vertical Supports (7) (right and
left), using Bolts (2) and Nuts (6). Tighten Nuts and Bolts securely. If Rooftop is not
preassembled with Slats (15), use Woodscrews (4) to assemble. See
Figure D.
6.
Gently tap the Crank (13) onto end of the Spindle at the Wooden Locking Pin (A) with a
hammer (hammer not included). See
Figure E.
7.
Tie Rope (16) around handles of Bucket (14). Staple other end of Rope onto Spindle (9)
securely. (Staple Gun not included). Wrap Rope around Spindle several times so the Bucket
is visible and not resting on the bottom of the Wishing Well Base. See
Figure C and E.
Figure D
Part 10
Part 8
Part 7
Figure C
Part 11
Part 12
Part 2 & 6
Part 13
Part 15
Part 16
Part 14
Figure E
Part 9
Part 16
A
90792 Wishing Well.p65
11/20/03, 12:36 PM
4