UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 5) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
We suggest you assemble the unit on a soft, clean surface to avoid damage to the finish.
SKU 90792
Page 3
1.
Join the Vertical Supports (7 & 8) with the Screws (1) and Nuts (6) in two places each. This
will make two Vertical Support assemblies. See
Figure A.
2.
On the outer side of Well Base (10), insert Bolts (3) on each side so they show on the inside
of the Well Base. See
Figure A.
ASSEMBLY OF WISHING WELL
3.
Insert the Spindle (9) into the large holes near the top of the Vertical Supports (7) (left and
right). You do this by pressing the Wooden Locking Pin (A) at the end of the Spindle (9) into
the holes near the top of the Vertical Supports (7). See
Figure A & B.
Figure A
Part 7
Part 8
Part 1
& 6
Part 10
Part 3
Figure B
A
Vertical
Support
Assembly
Part 9
90792 Wishing Well.p65
11/20/03, 12:36 PM
3
