background image

Page 5

For technical questions, please call 1-800-520-0882.

Vertical Engine

13. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields 

in close proximity to a heart pacemaker could 

cause pacemaker interference or pacemaker 

failure.  Caution is necessary when near 

the engine’s magneto or recoil starter.

14. Use only accessories that are recommended by Harbor 

Freight Tools for your model.  Accessories that may 

be suitable for one piece of equipment may become 

hazardous when used on another piece of equipment.

15. Do not operate in explosive atmospheres, 

such as in the presence of flammable 

liquids, gases, or dust.  Gasoline-powered 

engines may ignite the dust or fumes.

16. Stay alert, watch what you are doing and use common 

sense when operating this piece of equipment.  Do 

not use this piece of equipment while tired or under 

the influence of drugs, alcohol or medication.

17. Do not overreach.  Keep proper footing and 

balance at all times.  This enables better control 

of the equipment in unexpected situations.

18. Use this equipment with both hands 

only.  Using equipment with only one hand 

can easily result in loss of control.

19. Dress properly.  Do not wear loose clothing or 

jewelry.  Keep hair, clothing and gloves away 

from moving parts.  Loose clothes, jewelry or 

long hair can be caught in moving parts.

20. Parts, especially exhaust system components, get 

very hot during use.  Stay clear of hot parts.

21. Do not cover the engine or equipment during operation.

22. Keep the equipment, engine, and 

surrounding area clean at all times.

23. Use the equipment, accessories, etc., in accordance 

with these instructions and in the manner intended for 

the particular type of equipment, taking into account 

the working conditions and the work to be performed.  

Use of the equipment for operations different from 

those intended could result in a hazardous situation.

24. Do not operate the equipment with known 

leaks in the engine’s fuel system.

25. This product contains or, when used, produces a 

chemical known to the State of California to cause 

cancer and birth defects or other reproductive harm.  

(California Health & Safety Code § 25249.5, 

et seq.

)

26. When spills of fuel or oil occur, they must be 

cleaned up immediately.  Dispose of fluids and 

cleaning materials as per any local, state, or 

federal codes and regulations.  Store oil rags in 

a bottom-ventilated, covered, metal container.

27. Keep hands and feet away from moving parts.  Do 

not reach over or across equipment while operating.

28. Before use, check for misalignment or binding 

of moving parts, breakage of parts, and any 

other condition that may affect the equipment’s 

operation.  

If damaged, have the equipment 

serviced before using.

  Many accidents are 

caused by poorly maintained equipment.

29. Use the correct equipment for the application.  Do 

not modify the equipment and do not use the 

equipment for a purpose for which it is not intended.

30. Follow equipment manufacturer’s 

operation precautions.

Содержание 68122

























Отзывы: