background image

Page 18

For technical questions, please call 1-800-520-0882.

Vertical Engine

•  You are responsible for shipping your engine to a HFT warranty 

station as soon as a problem exists.  Contact the HFT Customer 

Service department at the number below to make shipping 

arrangements.  The warranty repairs should be completed 

in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights 

and responsibilities, you should contact the Harbor Freight 

Tools Customer Service Department at 1-800-444-3353.

Harbor Freight Tools Emission Control 

Defects Warranty Provisions

1.  Length of Coverage

HFT warrants to a first retail purchaser and each subsequent 

purchaser that the engine is free from defects in materials and 

workmanship that cause the failure of warranted parts for a period of 

two (2) years after the date of delivery to the first retail purchaser.

2.  No Charge Repair or Replacement

Repair or replacement of any warranted part will be performed at 

no charge to the owner if the work is performed through a warranty 

station authorized by HFT.  For emissions warranty service, contact 

the HFT Customer Service Department at 1-800-444-3353.

3.  Consequential Damages Coverage

Coverage under this warranty shall also extend to the failure 

of any engine components caused by the failure of any 

warranted part while it is still covered under this warranty.

4.  Coverage Exclusions

Warranty claims shall be filed in accordance with the provisions 

of the HFT warranty policy explained in the box at the top of the 

previous page.  HFT shall not be liable for any loss of use of 

the engine, for any alternative usage, for any damage to goods, 

loss of time, or inconvenience.  Warranty coverage shall also be 

excluded for any part which fails, malfunctions, or is damaged 

due to failure to follow the maintenance and operating instructions 

set forth in the Owner’s Manual including, but not limited to:
a)  Use of parts which are not authorized by HFT
b)  Improper installation, adjustment or repair of 

the engine or of any warranted part unless 

performed by an authorized warranty center

c)  Failure to follow recommendations on fuel 

use contained in the Owner’s Manual

d)  Improper or inadequate maintenance of any warranted parts
e)  Repairs performed outside of the authorized 

warranty service dealers

f) 

Alterations by changing, adding to or 

removing parts from the engine.

5.  Service and Maintenance

Component parts which are not scheduled for replacement as 

required maintenance or are scheduled only for regular inspection 

to the effect of “repair or replace as necessary” are warranted for 

the warranty period. Any warranted part which is scheduled for 

replacement as required maintenance is warranted for the period 

of time up to the first scheduled replacement point for that part.  

Any replacement part, provided it is equivalent in durability and 

performance, may be used in performance of maintenance or repairs.  

The owner is responsible for commissioning a qualified technician/

mechanic to perform all required maintenance, as outlined in the 

Inspection, Cleaning, and Maintenance section in this manual.

6.  Warranted Parts

1)  Fuel Metering System

i) 

Carburetor and its internal parts.

ii)  Fuel pump (if so equipped).
iii)  Cold start enrichment system.

2)  Air Induction System

i) 

Intake pipe/manifold.

ii)  Air cleaner.

3)  Ignition System

i) 

Spark plug.

ii)  Magneto ignition system.

4)  Catalyst System (if so equipped)

i) 

Exhaust pipe stud.

ii)  Muffler.
iii)  Catalytic converter (if so equipped).

5)  Miscellaneous Items Used in Above Systems

i) 

Vacuum, temperature and time 

sensitive valves and switches.

ii)  Hoses, belts, connectors, and assemblies.

CALL SERVICE FOR ENGINE ISSUES AT: 

(800) 520-0882 M-F 8-5 CST

Содержание 68122

























Отзывы: