SKU 43476 PAGE 4
REV. 10/03
OPERATING INSTRUCTIONS
NOTE: All parts below refer to the Assembly Diagram on page 8 of this
manual.
1.
Plug the 3-Prong Power Cord Plug (not shown in Assembly Illustration) of the unit
into a grounded, 3-Hole Electrical Outlet.
2.
Select the size, type, and thickness of the bag to be sealed (up to 12” wide.
Polyethylene
, under 0.06mm to 0.2mm; or
Polypropylene
, under 0.03mm to
0.08mm).
3.
Make sure the Handle (part #36) is in the upward/open position.
4.
Refer to the “Heat Adjustment Chart”
shown below
in order to set the Timer Knob
(part #48) to the proper setting according to the size, type, and thickness of seal-
ing bag selected.
5.
Fill the sealing bag to approximately 3/4 full with contents to be sealed and align
the top edges of the bag.
6.
Turn the Timer Knob clockwise to the desired heating time (1 to 8).
7.
Position the aligned top edges of the sealing bag over the top ridge of the Teflon
Cloth (part #25) and hold in place.
(
NOTE
: Allow approximately 1” excess waste of sealing bag material as
shown
on the next page #5
)
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 7)
are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.
MATERIAL
INDICATOR
UNDER 0.06 m/m
UNDER 0.1 m/m
UNDER 0.14 m/m
UNDER 0.2 m/m
UNDER 0.03 m/m
UNDER 0.044 m/m
UNDER 0.06 m/m
UNDER 0.08 m/m
43476 manual.p65
10/15/03, 3:16 PM
4
Brought to You by Augusta Flint
