background image

7

ASSEMBLY INSTRUCTIONS

5b. Connect BARE/GREEN ground wire from outlet 

box to BARE ground wire from fixture (A) with 
wire connector (AA). Connect WHITE wire from 
fixture (A) to WHITE wire from outlet box using 
existing wire connector or wire connector (AA). 
Connect BLACK wire from fixture (A) to BLACK 
wire from outlet box using existing wire connector 
or wire connector (AA).

NOTE:

 Screw wire connectors (AA) on in a 

clockwise direction.

      

WARNING:

 Never connect ground wire to 

WHITE or BLACK power supply wires.

      WARNING: 

To reduce the risk of fire, 

electrical shock or personal injury, wire 
connectors (AA) are designed to accept only one 
12-gauge house wire and two lead wires from the 
light fixture. If your house wire is larger than 
12-gauge or there is more than one house wire to 
connect to the corresponding fixture lead wires, 
consult an electrician for the proper size wire 
connectors to use.

Hardware Used

Wire Connector

  x 3

AA

5b

Outlet

Box

A

6. Wrap electrical tape (not included) around each 

individual wire connector (AA) down to the wire. 

       

WARNING:

 Make sure no bare wire or wire 

strands are visible after making connections.

Push wire connectors (AA) gently back into outlet 
box. Carefully push excess wiring into outlet box. 

AA

AA

6

Outlet

Box

A

AA

AA

AA

BARE/GREEN

BLACK

WHITE

AA

Содержание WL137MW



















Отзывы: