Secure mounting bracket (C) to outlet box using
screws, spring washers, and flat washers
provided with the outlet box. (Fig. 4)
*
NOTE: It is very important that you use the
proper hardware when installing the mounting
bracket (C) as this will support the fan.
IMPORTANT:
If using the angle mount, make
sure open end of mounting bracket (C) is installed
facing the higher point of the ceiling.
4.
FAN MOUNTING
8
Remove pin (N) and clip (O) from downrod (A).
(Fig. 1A)
Partially loosen set screws in motor housing
yoke at top of motor housing (E). (Fig. 1B)
*Helpful Hint:
Downrod style mounting is best
suited for ceilings 8 ft. (2.44 m) high or higher.
For taller ceilings you may want to use a longer
downrod (not included) than the one provided.
Angle style mounting is best suited for angled
or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance.
Set
Screw
1.
INITIAL INSTALLATION
1A
1B
E
N
O
A
4
C
