14
FINAL INSTRUCTIONS
Lowes.com/harborbreeze
Remove the preassembled wiring harness (with pull
chain, 6-pin connector and plugs) from the light kit (L).
12.
11.
For assembly without the light kit (L), remove the
preassembled screw in the middle of bottom housing
(R) and disassemble bottom housing (R) from motor
body (G). Save screw for later use.
Remove the bell mouth nut from pull chain and pass
the pull chain leg throuth the round hole on the bottom
housing (R). Tighten it with bell mouth nut. Attach the
6-pin connector from the wiring harness to the 6-pin
connector preassembled on bottom housing (R).
13.
L
12
Wiring Harness
R
13
Wiring
Harness
Bell Mouth
Nut
R
G
Screw
11
