15
Lowes.com/harborbreeze
FINAL INSTALLATION
3 . Partially insert three blade screws (BB), along with
three blade washers (CC) through one blade (H)
and into one blade arm (G) . Tighten each blade
screw (BB) with a Phillips screwdriver (not included),
starting with the one in the middle . Repeat this step
for the remaining blades (H) and blade arms (G) .
Haodwaoe Used
BB
Blade Screw
x 15
CC
Blade Washer
x 15
BB
H
G
CC
H
3
4 . Insert blade arm (G) through slots in the side of the
motor assembly (E) . Align the holes of one blade
arm (G) with two motor screw holes in underside
of the motor assembly (E) . Secure with two motor
screws (AA) . Repeat this step for the remaining
blade arms (G) .
Haodwaoe Used
AA
Motor Screw
x 10
G
G
E
AA
4
5 .
Remove one of the four fitter plate screws (II) located
on the underside of the motor assembly (E) and
loosen the other three screws . Align the screw holes
of the light kit plate (L) with the loosened fitter plate
screws (II). Replace previously removed fitter plate
screw (II), then tighten all screws .
Haodwaoe Used
II
Fitter Plate
Screw
x 4
L
II
E
5
