background image

15

CARE AND MAINTENANCE

Important:

Shut off main power supply before beginning any maintenance. Do not use water or a 

       damp cloth to clean the ceiling fan.

.   At least twice each year, tighten all screws and lower canopy to check mounting plate screws.

.   Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean blades 

    with a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood blades for 

    added protection.

OPERATING INSTRUCTIONS 

5. Remote functions:

            Turn speed up.

            Turn speed down.

            Turn fan ON/ OFF.

            a.) Turn light ON/OFF. 

            b.) Press and hold the button to start circular 

            dimming, the transmitter will beep twice when the   

            light is brightest or darkest.

            Press this button to switch color temperature when 

            the light is on.

            : Tap and the fan will turn off after 1 hour.

            : Tap and the fan will turn off after 3 hours.

            : Tap an the fan will turn off after 6 hours.

            Tap and the light will turn off after 1 minute.

    

 NOTE: 

This model needs to be equipped with a 

     dedicated CCT LED light, only used the light kit 

     provided by the manufacturer.

5

1h
3h
6h

Содержание HTE21091




















Отзывы: