3.
If mounting surface is drywall,
mark the
location of the holes using a pencil or a marker
(not included). Use a 7/32 in. drill bit (not
included) to drill two pilot holes in drywall at
marked locations.
Position plastic anchor in each pilot hole. Gently
tap plastic anchors with a hammer (not
included) until flush with wall surface. Screw
bracket screws into plastic anchor.
The remote control transmitter from remote
pack (N) rests inside the bracket.
5.
3
Align slots on shade (M) with protrusions on
underside of motor assembly (I). Turn shade (M)
clockwise
until it no longer turns.
NOTE:
Pull down gently on the shade (M) to make
sure it is secured completely.
5
Remote Control
Bracket
Wall
Bracket
Screws
Wall
Anchors
Slot
Protrusion
FINAL INSTALLATION
4
Remote Control
Bracket
Wall
Bracket
Screws
If you wish to use the remote control bracket
from remote pack (N) on a wood surface, install
bracket screws from remote pack (N) through
bracket and into the desired installation site.
4.
15
M
