WIRING
FINAL INSTALLATION
12
DANGER:
To reduce the risk of serious bodily
injury,
DO NOT use power tools to assemble the
blades (J). If overtightened, blades (J) may crack and
break.
Select five blades (J) to attach the five blade
brackets (K). Place one blade bracket (K) on top of
blade (J) aligning the two biggest of four holes at top
of blade (J). Attach blade bracket (K) to top of blade
(J) with two blade screws/washers (AA), and two
decorative nuts (BB).
Repeat step for the other four blades (J).
1
Hardware Used
Blade Screw/Washer
x 10
AA
Decorative Nut
x 10
BB
1.
K
J
BB
AA
3
Gently slide remote control receiver (Q) flat-side
up into mounting bracket (C). Turn spliced/taped
wires upward and gently push wires and wire
connectors (CC) into outlet box. Let antenna from
remote control receiver (Q) hang to the side.
NOTE:
The remote control included with this fan
meets the following requirements:
a.
Not for use with solid state fans.
b.
Electrical rating: 120V / 60 Hz;
motor amps:1.25 MAX.
3.
Antenna
A
Q
C
