manualshive.com logo in svg
background image

14

Lowes.com/harborbreeze

1

FINAL INSTRUCTIONS

OPERATING INSTRUCTIONS

DD

2

2. When the season changes, you may want to change 

the direction the fan spins. In warmer weather, 

counterclockwise rotation creates a downward air flow, 

which cools the air. Push the reverse switch located on 

light kit (K) LEFT and see a SUN icon. In cooler 

weather, clockwise rotation creates an upward air flow, 

which moves hot air from the ceiling into room. Push 

the reverse switch RIGHT and see a SNOWFLAKE icon.

9. Connect the fobs (DD) to the appropriate pull chains.

1. The fob (DD) marked with a fan image is for motor 

speed control: High, Medium, Low and Off. Pull once 

for each position.
The fob (DD) marked with a lamp image controls the 

light, either ON or OFF with each pull of the chain.

9

Hardware Used

DD

Fob

x 2

DD

Note:

 Use a small screwdriver or ballpoint pen to move 

the reverse switch if you have difficulty doing so by hand.

Note:

 Make sure reverse switch is firmly in left or right 

position. Fan will not operate when switch is in the middle. 

      CAUTION:

 Turn off and wait for fan to stop before 

moving the reverse switch.

Содержание CPJ1240



















Отзывы: