3. Wrap electrical tape (not included) around each wire
connector (AA) and make sure no bare wire or wire
strands are visible after making connections.
Then, turn wires upward and carefully push them into
the outlet box; make sure the WHITE and GREEN
connections are on one side and the BLACK
connections are on the other side.
3
BLACK
BLUE
WHITE
GREEN
Outlet Box
A
B
R
B
C
1
11
WIRING INSTRUCTIONS
FINAL INSTRUCTIONS
1. Loosen (but do not remove) the two preassembled
mounting bracket screws (R) on mounting bracket (A)
that align with the slotted holes on canopy (B). Remove
the other two mounting bracket screws (R).
2. Position one blade iron (I) under blade (J). Insert
three blade screws (BB) through blade (J) and into
blade iron (I). Tighten each blade screw (BB) evenly,
starting with the center blade screw (BB). Repeat for
the remaining blade assemblies.
Lift canopy (B) up so slotted holes engage loosened
screw heads on mounting bracket (A), then twist
canopy (B) clockwise. Re-install previously removed
mounting bracket screws (R), then tighten all screws
securely.
Hardware Used
Blade Screw
x 15
BB
Lowes.com/harborbreeze
2
J
BB
I
Note:
Flushmount installation will not use the downrod assembly (D), canopy cover (C) or coupling
cover (E) as shown.
Note:
If the canopy cover (C) is loosened during
installation, press it to the inner edge of the canopy (B).
