1. Connect the GREEN wires from the hanger ball of
downrod assembly (D) and mounting bracket (A) to
the supply ground (GREEN or bare) wire. Securely
connect wires using wire connector (AA).
2. Securely connect the fan WHITE wire to the supply
WHITE wire using wire connector (AA). Securely
connect the fan BLACK and BLUE wires to the supply
BLACK wire using wire connector (AA).
Note:
Flushmount installation will not use the Green
wire from the downrod assembly (D).
Hardware Used
Wire Connector
x 1
AA
Hardware Used
Wire Connector
x 2
AA
1
Supply
Ground Wire
Green Wire from
Mounting Bracket
Green Wire from
Hanger Ball
A
D
2
Black
Fan Wire
Blue
Fan Wire
BLACK
GREEN
WHITE
White
Fan Wire
WARNING:
To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before hanging.
WARNING:
If you are not sure if the outlet box is grounded, contact a licensed electrician for
advice, as it must be grounded for safe operation.
WARNING:
If house wires are of different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine proper wiring.
WARNING:
If you feel that you do not have enough electrical wiring knowledge or experience,
have the fan installed by a licensed electrician.
10
Lowes.com/harborbreeze
WIRING INSTRUCTIONS
Note:
This is only one way to wire the fan; consult a
qualified electrician if it is not applicable to your home.
Note:
The BLACK wire is hot power for the fan. The
WHITE wire is common for the fan and light. The BLUE
wire is hot power for the light. The GREEN wire is the
ground wire.
