OPERATING INSTRUCTIONS
At least twice each year, lower canopy (B) to check downrod (A) assembly, and then tighten all
screws on the fan. Clean motor housing (D) with only a soft brush or lint-free cloth to avoid
scratching the finish. Clean blades (F) with a lint-free cloth. You may occasionally apply a light
coat of furniture polish to wood blades for added protection.
IMPORTANT:
Shut off main power supply before beginning any maintenance. Do not use water
or a damp cloth to clean the ceiling fan.
CARE AND MAINTENANCE
15
Lowes.com/harborbreeze
2C.
IMPORTANT
: Reverse switch must be set
either
completely
UP
or
completely
DOWN
for
fan to function. If the reverse switch is set in the
middle
position, fan will not operate.
2C
TROUBLESHOOTING
WARNING
: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Fan does not move.
1. Reverse switch not engaged.
2. Power is off or fuse is blown.
3. Faulty wire connection.
1. Push switch firmly either up or
down.
2. Turn power on or check fuse.
3. Turn power off. Loosen canopy
and check all connections.
Noisy operation.
1. Blades are loose.
2. Cracked blade.
3. Full range dimmer switch.
4. Fan is new.
1. Check to be sure plastic locking
mechanisms are secure.
2. Replace blade.
3. Replace with an approved
speed control device.
4. Allow fan a “break in” period of a
few days, especially when
running the fan at Medium and
High speeds.
