INITIAL INSTALLATION
7
5. Remove 6 motor screws (H), 6 lock washers (I)
and 6 flat washers (J) from top of motor housing
(D).
Place one blade (N) on top of motor housing (D),
aligning holes in blade (N) with holes in motor
housing (D). Attach blade (N) with 2 motor screws
(H), lock washers (I) and flat washers (J). Tighten
motor screws (H) securely. Repeat for remaining
blades (N).
Note
: Make sure to attach blade (N) with the angled
side of the blade facing down.
6.
7.
7
6
Secure mounting bracket (C) to outlet box (not
included) using screws, spring washers and flat
washers provided with the outlet box.
*
NOTE:
It is very important you use the proper
hardware when installing the mounting bracket
(C) as this will support the fan.
IMPORTANT
: If using the angle mount, make
sure open end of mounting bracket (C) is
installed facing the higher point of the ceiling, and
ensure the ceiling angle is not steeper than 19°.
Open End
C
C
ANGLE
MOUNT
STANDARD
MOUNT
D
Angled Side
of Blade
I
H
J
N
D
5
H
I
H
J
H
H
(Top View)
