14
FINAL INSTALLATION
6. If you wish to use the remote control bracket from
remote pack (P), install screws from remote pack (P)
through bracket and into the desired installation site.
The remote control transmitter from remote pack (P)
rests inside the bracket.
Remote Control
Bracket
Wall
Bracket
Screws
6
4.
5. Align slots on glass shade (U) with protrusions on
the inside of the light kit fitter. Turn glass shade (U)
clockwise
until it no longer turns.
NOTE:
Pull down gently on the glass shade (U) to
make sure it is secured completely.
Carefully arrange wiring within the LED light kit.
Align slotted holes in LED light kit (K) with loosened
screws in fitter plate. Twist LED light kit (K) to lock.
Insert fitter plate screw (BB) from hardware contents
and tighten all three fitter plate screws (BB) and (S)
with a Phillips screwdriver.
BB
4
K
D
S
S
U
5
