WIRING
9
WARNING:
To reduce the risk of fire,
electrical shock, or personal injury, wire
connectors provided with this fan are designed
to accept only one 12-gauge house wire and two
lead wires from the fan. If your house wire is
larger than 12-gauge or there is more than one
house wire to connect to the two fan lead wires,
consult an electrician for the proper size wire
connectors to use.
CAUTION:
Be sure outlet box is properly
grounded and that a ground (green or bare) wire is
present.
WARNING:
If house wires are different
colors than referred to in the following steps,
stop immediately. A professional electrician is
recommended to determine wiring.
If you decided to cut back the lead wires in Step 4,
strip 1/2 in. of insulation from end of white wire.
Twist stripped ends of each strand of wire within
the insulation with pliers (not included). (Fig. 5)
Repeat Step 5 for black, blue (if applicable) and
green wires.
5
5.
Install ball end of downrod (A) into mounting
bracket (C) opening. Align slot in ball with tab in
mounting bracket (C). (Fig. 6)
DANGER
: Failure to align slot in ball with tab
may result in serious injury or death.
6.
6
Slot
Tab
C
A
FAN MOUNTING
