Align hole in center of light kit fitter (G) with
threaded rod on fitter plate (E) and push up
gently until threaded rod comes through hole.
Secure light kit fitter (G) with finial (R) that
was previously removed. (Fig. 7)
7.
13
Connect male plug from motor housing (D) to
female plug from light kit fitter (G), matching up
the colors on the male plug with the colors on
the female plug for correct fit. Make sure plugs
are connected completely. (Fig. 6)
6.
Remove finial (R) from threaded rod on fitter
plate (E). (Fig. 5)
Save finial (R) for later use
.
FINAL INSTALLATION
Female
Plug
Male
Plug
G
D
G
Threaded
Rod
R
E
5.
5
R
E
6
7
