INITIAL INSTALLATION
I
6
Turn off circuit breakers and wall switch to the fan
supply line leads. (Fig. 1)
DANGER
: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
2.
Check to make sure blades (I) are at least 30 in.
from any obstruction. Check downrod (A) length to
ensure blades (I) are at least 7 ft. above the floor.
(Fig. 3)
3.
ON
OFF
ON
OFF
1
3
7 ft.
min.
30 in.
min.
Determine mounting method to use. (Fig. 2)
A.
Normal mount
B.
Angle mount
Important:
If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
2
A
B
