HAPRO Luxura V6, Руководство пользователя

Страница: 11 / 20

SmartVoice
Studio
Wellness
1
3
2
6
4
5
+
+
+
11
DISPLAY DEFAULT
1
Unit
1.
Start time (minutes) 0 = Coin unit / 1 - maximum time = Stand alone 0
2.
Maximum time Time at which the decorative lighting is switched on 30 (min.)
3.
Special mode 1 = Restore factory settings / 6 = Reset TL hour meter 0
4.
Pin code Unique code for entering the parameter menu 000
5.
Usefull life lamps Step Size: 100 hours. 0 = no message 0 (hours)
6.
Clean time (minutes) The length of time the display is switched off for cleaning 1 (min.)
2
Bodycooler
1.
Bodycooler at start Speed of the body cooler at the beginning of the session 1
3
Xsens
1.
Xsens available Off
2.
Xsens at start Xsens scent at the beginning of the session (0 = off) Off
4
SoundAround
1.
My MP3 input present On
Tanning appliance settings
Note:
If no button is pressed for one minute, you automatically return to the stand-by screen.
PARAMETERMENU
Hold the
body cooling
and
minus
buttons for ten seconds.
Enter the PIN code; it is set to 000 by default.
You can change the value of the digit with plus and minus.
Press the body cooling button to proceed to the next digit.
Press
start/stop
to confirm the PIN code.
PARAMETERS
The sunbed can be set to your preferences by changing the parameters shown here. The parameters that are not shown in the table may only be changed by
your dealer.
Navigate to the desired submenu with plus and minus , and press start/stop to confirm your choice.
Press the body cooling button to return to stand-by.
Navigate to the desired parameter menu with plus and minus , and press start/stop to confirm your choice.
Press the body cooling button to return to the parameter menu. Use plus and minus to change the value.
Save the new value with start/stop . You now return to the submenu.
Press the
body cooling
button to cancel the new value. You now return to the submenu.