HAPRO Luxura V6, Руководство пользователя

Страница: 9 / 20

ambient
+
+
+
+
+
Reading the hour counters and software versions
9
STATUSMENU
Hold the
body cooling
and
plus
buttons for five seconds.
You now see the unit status menu.
The hour counters and software versions can be viewed here.
RESETTING THE HOURS COUNTERS
Select LH.
Hold the start/stop button for three seconds.
Enter the PIN code and press start/stop. It is set to 000 by default.
The hour counters are reset.
Maintenance
CLEANING
The tanning appliance is equipped with a touch panel control. To prevent accidental operation of the machine
during cleaning, you can temporarily switch off the control.
Hold the
plus and minus buttons for five seconds.
The display counts down from 60 to 0.
During this period the display cannot be operated.
The time you have to clean the machine can be changed.
The standard cleaning time is 1 minute.
REPLACING THE QSENS (OPTION) LIQUID JUG
Never refill your Qsens liquid jug with regular tap water or any other liquid. Replace with an original Hapro Sanitized Qsens liquid jug. Remember to order the
Qsens liquid jugs in time. Before Qsens can be used for the first time or after replacement of the liquid jug, the system must be bled of air.
Hold the body cooling and minus buttons for five seconds.
Enter the PIN code; it is set to 000 by default. Press start/stop to confirm the PIN code.
You are now in the parameter menu.
Navigate to ‘05 - Qsens’ with plus and minus , and press start/stop to confirm your choice.
Navigate to ‘03 - Qsens initialization’ with plus and minus , and press start/stop to confirm your choice.
Navigate to ‘YES’ with plus and minus to immediately start the initialization.
Wait until the Qsens nozzles produce a fine mist of water.
Press
plus or minus to stop the initialization.
Press 3x the
body cooling
button to exit the parameter menu.
Your Qsens set is now ready for use.