HAPRO Luxura V6, Руководство пользователя

Страница: 8 / 20

ambient
8
QSENS (OPTIONAL)
Press the
Qsens
button.
The text ‘ON’ now appears on the display; Qsens is on. The LED above Qsens is now on.
Switch off Qsens by pressing the Qsens button again.
The text ‘OFF’ now appears on the display. The LED above Qsens is now off.
WARNINGS
Unknown fault, caused by newer control section
Time error in switching section or relay fault
Overheating appliance
Communication error
Internal fault in switching section, sense controller not communicating
Touch panel communication not present
Lamp hours exceeded
See section ‘resetting the hour counters’ to clear the LH message from the display.
AMBIENT FLOWLIGHT SWITCH OFF (OPTIONAL)
To switch off the Ambient Flowlight, hold the bodycooler button for five seconds.
Press any button to switch the Ambient Flowlight back on.
Note:
If an option is not installed, "NA" appears in the display
Note:
When one of the above-mentioned fault messages appears on the display, you should no longer use the tanning
appliance and the plug should be removed from the mains outlet. Contact your dealer. (This does not apply to the LH message.)