HappyJapan HCU2, Инструкция

Страница: 90 / 393

-CU -87
8-1a
ADJUSTING THE THREAD TENSIONS / Digital thread tension
8_1a V624
1. Press .
2. Select the needle bar that adjust thread
tension.
With the thread going through the hole of
the pressure foot, pull it out slowly toward
the front.
3. Press to adjust the thread tension.
("0 " Loosen ~ "30" Tighten)
You can open or close the thread clip.
4.Press .
The screen returns to Drive mode.
Digital thread tension installed machine (Dealer-installed option)
Set the thread tension on each needle bar of the current pattern.
You can set thread tensions for each needle bar proper to the kind of thread or sewing method.
This setting is saved per pattern.
If the tightness is weak on a thick fabric such as denim, increase the bobbin thread tension
( 4-5) or set the [2 Tightness level] in [MACHINE SETTINGS ( 15-1)] to [+ (Tight)].
All needle bars can be set together. 3-7b
Pressure foot
Thread tension set at 4th needle
Thread tension
The thread clip installed machine (Dealer-installed option) opens
only the thread clip of the selected needle.
The thread clip other than the selected needle is always closed and
can not be pulled. 4-7
Thread clip of selected needle