HappyJapan HCU2 Скачать руководство пользователя страница 218

Страница: 218 / 393

-S3 -116

5. Press

6. Press

The display returns to MENU.

7. Press

The machine will automatically connect with
HAPPY link LAN booted on the PC.

If the IP address is set automatically, it will take

longer time to connect than the manual setting.

When connected,

is displayed.

is not displayed in the screen, refer to

the following causes and countermeasures.

18-2f

OTHER SETTINGS

18_2f W601

Causes and countermeasures

Is IP address overlapped on the machine with other machine that creates LAN

connection.
If so, set IP address so that IP Address on each machine is not overlapped.

Is “HAPPY link LAN” booting.

If not booted, boot “HAPPY link LAN” on the PC.
LAN is not recognized before HAPPY link LAN is booted.

Is IP Address in “HAPPY link LAN” set correctly.

Set up the IP Address correctly based on the “HAPPY Link LAN” manual.

Are PC network settings set correctly.

Set up the PC network settings correctly based on the “HAPPY Link LAN” manual.

Содержание HCU2










































































































































































































































































































































































































Результаты поиска

Содержание HCU2

Отзывы:

Бренды по названию

Популярные бренды

HappyJapan HCU2, Инструкция

Результаты поиска

Содержание HCU2

Отзывы:

Бренды по названию

Популярные бренды