HappyJapan HCU2, Инструкция

Страница: 30 / 393

-UP -25 3_9c U901
3-6
DRIVE MODE
Frame out
Move frame to the front position which was set on
the Machine setting
( 15-1b)
before.
Press (Position) to return the frame to the
original position before frame out position.
It is convenience if hand work is required in the
middle of embroider process.
Position
When sewing is interrupted in the middle of a de-
sign, this returns the frame to current sewing
position regardless of where frame may have been
moved with the arrow keys after interrupt.
target design.
6
Frame move
Selection the way of frame movement and
Move frame.
Frame change
3-8a
Change the frame to be used.
Design centering
Move design to the center of frame.
Center
Moves the embroidery frame to the center auto-
matically.
5
i-Custom 22-1
The following display and key icons are set as default. You can place other frequently used icons freely on
the right side of Drive mode screen.
Calendar
Current year, month date is displayed.
Clock
Current time is displayed.
Stitch number forward
Move the frame forward or backward by the one.
In addition, “Key lock” function can be used by
setting. 15-2
When the key is pressed continuously, the “Key
lock” function is activated and the frame will move
continuously even the finger is released from the
key.
When the key is pressed much longer, the step of
“Stitch number forward” will be changed from one
stitch to 10 stitches.
When you stop it, press
(Start/Stop button).
Pressure foot
You can raise or lower the pressure foot by press-
ing this key
Also, you can adjust the height and stoke of each
needle bar by pressing long time. 3-7c
Digital thread tension 3-7b
A digital thread tension can be assigned to the
current needle bar. ("0 " Loosen ~ "30" Tighten)
(Digital thread tension)
Upper thread clip 4-7
You can open or close the upper thread clip.
Thread tension
Cross pointer (HCU-1401)
Turn on and off the cross pointer.
Closs pointer is located at needle no.8.(Needle
no.8 position).
When cross pointer is turned on, moving head
moves to needle no.8 position and radiates.
Auto
By pressing the long time, "Auto"
will appear.
Cross pointer turned on automatically, after the
color change stop function or embroidery finished.
To release this function, press the key long time.