Happy Industrial Corporation HCD2, Инструкция

Страница: 108 / 207

-D2 -92
12-8
PATTERN SETTINGS
12_8 M717
Offset
Setting the offset point designates a place for the frame to rest before moving to the start point
of the actual embroidery.
When used together with the "Auto origin" ( 12-7) feature, the machine will return to the offset
when it is finished embroidering as well.
This allows you to send the frame to a place where it will be easier to handle, when you will
need to change hoops for example.
Direct input
You can move the offset point manually and save the position with "Teaching input".
Preset
There are 9 preset points that can be used for offsets around and in the center of the pattern.
Teaching input
You can set the offset point manually.
When you Press (Original point return) or use "Auto origin" ( 12-7) with an offset, the
frame will return to the offset point.
❍
: Offaet point
●
: Start point of pattern
■
: End point of pattern
Auto origin