Happy Industrial Corporation HCD2, Инструкция, Страница: 100 / 207

-S2 -30
11-C
PATTERNS IN MEMORY
11_C N401
Retrieve built-in data from machine
100 pattern data are built-in in machine and you need to retrieve built-in pattern data from ma-
chine memory to design data folder. These pattern data are stored in the [Group 4] folder on
the PATTERN screen.
Empty the [Group 4] folder before built-in pattern data are retrieved from machine memory.
Built-in pattern data cannot be retrieved if there is any pattern data in the [Group 4] folder.
Built-in pattern data can be moved to other folder and/or deleted like monogramming data made
on LETTER screen and other pattern data imported from outside of machine. 11-7, 5-B
You can retrieve the pattern data from machine memory again after deleting the built-in data.
1. When the machine is stopped press .
2. Select "PATTERN" .
3. Press from right submenu.
4. Press from right submenu.
5. Press from right sub-menu.
Retrieving patter data is started.
It takes several minutes to complete data retriev-
ing.
100 built-in data is shown on page 26-4.
Press to return to Menu mode.
N
右側の folder