Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(37)
B
WARNING
After a new brake disc or pad is installed, do not
ride immediately but grasp and release the brake
handles several times to make the brake discs and
pads fully fit with each other, restore to their normal
holding forces and have the brake fluid circulate
stably.
B
WARNING
After a new brake disc or pad is installed, the
braking distance may be a little longer than the
original value.
After the brake discs and brake
pads have realized full break-in following a mileage
of about 300 km, the best braking effect will be
realized.
Make sure there is an enough braking
distance when riding before that.
B
WARNING
Fail to inspect and maintain the brakes pads or
brake disk, and replace them when recommended
can increase your chance of having an accident.
If you need to replace brake disk or brake pads,
have your Haojue dealer do these works. Inspect
and maintain the brake disk and brake pads as
recommended.
REAR BRAKE (DRUM BRAKE)
Adjustment of rear brake lever
Free stroke
1
of the rear brake lever refers to the stroke
between the lever’s free position and the lever’s position
when the lever is grasped on to brake the rear wheel. The
adjusting steps are as follows.
1. Turn the adjusting nut
2
on the brake.
Turn it
clockwise for a smaller free stroke, or anticlockwise
for a larger one. Make the free stroke
1
20–30mm.
2. After adjustment, checking, when the tire do not
connect the floor, turn around the wheel, have not
friction feeling. When grasping the lever, the distant
between the lever and handlebar is enough.
NOTE: If follow the steps, the free stoke is not required,
please have it checked by the authorized dealer.
36
Haojue HJ100T-7C 99011H79030H000 V01 Export Chinese 2016-6-30
(37)
