EN
Haojue EG125 99011H11A60H000 V01 EN+FR (EN) 2015-1-27
(13)
Accelerate
RIGHT HANDEL SWITCHES
ENGINE STOP SWITCH
1
The engine can only start up
when the switch is placed at
the “
*
” position, and the ignition
circuit is connected. If the switch
is at the “
%
” position, the ignition
circuit is cut off.
This is an
emergency stop switch.
LIGHT SWITCH
2
“
+
” position
The headlight, front position light, dashboard lights, tail
light will be turned on together.
“
6
” position
The front position light, dashboard lights, tail light will be
turned on together.
“
&
” position
All lights mentioned above will be turned off.
ELECTRIC STARTUP BUTTON
3
#
This button is used for operating the starter motor. With
the ignition switch at the “
*
” position, the engine stop
switch at “
*
” and the transmission in neutral, grasp the
clutch lever and push the electric starter button
#
to
operate the starter motor to start the engine.
B
WARNING
Engaging the starter motor for five at a time can
damage the start motor and wiring harness from
overheating.
Do not engage the starter motor for more than five
seconds at a time. If the engine does not start after
several attempts, check the fuel supply and ignition
system.
Refer to the “TROUBLESHOOTING”
section in this manual.
B
WARNING
When cleaning the motorcycle, do not directly
clean its electric parts, particularly its handle
switch.
B
WARNING
Do not use the electric start function and the kick
lever function at the same time.
B
WARNING
Do not start the motorcycle when the fuel or engine
oil is insufficient.
THROTTLE GRIP
4
The engine speed is controlled by the position of the
throttle grip. Turn it toward you to increase engine speed.
Turn it away from you to decrease engine speed.
11
Haojue EG125 99011H11A60H000 V01 EN+FR (EN) 2015-1-27
(13)
