HANYOUNG NUX MC9 Series, Руководство пользователя, Страница: 16 / 24

4 Setting Method
2 9
§ § S SV V v va al lu ue e s se et tt ti in ng g m me et th ho od d
There are some examples to change SV. Others are applied as same method.
If you want SV value to change CH¡– 1¡–in Zone ¡ 1¡–from 0C to 300C, please setup as
following a procedure .
§ § W Wh he en n y yo ou u i in nc cr re ea as se e S SV V v va al lu ue e( ( C Ch ha an ng gi in ng g 3 39 99 9 t to o 4 40 00 0) )
§ Press key to flicker Number of 9 unit like Figure [A] once.
Press key to change into
¡ 0¡–once.
Changed into 400 in the window of SV display like a figure below.
Figure [A] Figure [B]
Pressing ENT button once in PV/SV display mode,
SV setting mode is displayed like a figure of the left side.
4 - 1. Setting each Channel
And then make 3 By pressing key. Pressing ENT key again, 300 is registered in
setting above. Doing ENT key one more, it is moved on the range of Zone Memory.
Ex) 0<-0<-0<-0<-0 Whenever you push key, digit of SV is moved like a figure
with flickering operation. Set by using , key in sequence of numbers wanted.
If you press button once, ¡ 0¡–of the first SV is
flickered. If you press button
again,
¡ 0 0¡–is flickered and then do once more 0 of
¡ 000¡–is flickered.
C H
ZO N E
P V
S V
C H
ZO N E
P V
S V
C H
ZO N E
P V
S V
C H
ZO N E
P V
S V
2 8
§ Æ– ˜¡ 1 (LOC1 : Lock 1)
§ Æ– ˜¡ 2 (LOC2 : Lock 2)
Initial value : 0000
Contents : It is an equipment to limit a change of
parameter setting by controlling key.
DIGIT 1 : Prohibited the setting of all
parameters except SV, Alarm1,
Alarm2 & Alarm3.
0: Cancellation 1: Lock
DIGIT 2: Prohibited the setting of Alarm1,
Alarm2 & Alarm3.
0: Cancellation 1: Lock
DIGIT 3: Prohibited the setting of SV.
0: Cancellation 1: Lock
DIGIT 4: Not used(Fixed ¡ 0¡– )
C H
ZO N E
P V
S V
Initial value : 0
Setting range : 0 ~ 10
Contents : It is an equipment to limit prohibition of
RUN/STOP & Zone change.
DIGIT 1: Prohibited a change of
RUN/STO P
DIGIT 2: Prohibited a change of Zone
DIGIT 3: Not used (Fixed
¡ 0¡– )
DIGIT 4: Not used(Fixed ¡ 0¡– )
C H
ZO N E
P V
S V
§ ˙ ¥‰ˆ£ ‰ˆ£ (SCAN : Scan Interval Time)
Initial value : 2 s
Setting range : 1 ~ 100 s
Contents : Set time until current displayed channel
is changed into next channel.
C H
ZO N E
P V
S V