Hanwha Vision SPA-C100W, Руководство пользователя

Страница: 29 / 52

English _
29
!
USING CONTROLLER MODE
SYSTEM SETTINGS
Registers the device, source, and zone and sets the Event & Preset and annual schedules.
If the system is initialized or the network setting (User, DHCP) is changed after you register the device, you should
delete the device before registering it again.
Register Device
Controllable devices can be searched, and you can register or delete the devices by selecting them.
1. On the Home screen, click <System Setting>
➔
<Device Registration> .
2. Devices connected to the network are listed in < Device Search >.
If you click the [
] icon, the device list can be updated.
3. If you cannot search for the device, enter its IP address in the search bar and click the [ Add ] button to
manually add the device.
4. If you select a device to register from the < Device Search > list and click the [ ] button, the device is
moved to the <
Registered Devices
> list.
~ If you select the moved device and click the [ ] button, it returns to the < Device Search > list.
~ If you click the [ Cancel ] button, the selected device will be deselected, or devices moved back to the
<
Device Search
> list will be recovered.
The < Searched count > and < Registered count > will change depending on the device registration
status.
5. If you select devices to register and click the [Apply] button, devices are registered.
~
As only one < Controller > mode speaker should exist in the same network, register all the other
speakers as < Speaker > mode.
M
`
You can use the < Controller > mode speaker as the zone device after performing < Device Registration > as with other
speakers.
`
You should not use the < Controller > mode speaker and audio server (SPA-S1000) simultaneously in the same network.
If a speaker and microphone are repeatedly registered, the device may not be controllable.