Hanwha Vision SPA-C100W, Руководство пользователя

Страница: 19 / 52

English _
19
!
ENVIRONMENT SETTINGS
Restarting System
You can restart the system without disconnecting the power when a system reboot is needed.
1. On the Home screen, click <Environment Setting>
➔
<System Management> .
2. Click the [Apply] button in <System Restart> .
3. Click <OK> when the system restarting window appears.
It will take approximately 5 minutes to reboot the system.
Resetting the System
Initializes every system setting to the factory default values.
An IP address of the product is also initialized to the initial status, which is 192.168.1.100.
Please re-open the web page and access 192.168.1.100.
Even the power mode and operation mode become the PoE, which is the initial state and speaker mode.
1. On the Home screen, click <Environment Setting>
➔
<System Management> .
2. If you click the [ Apply ] button of the < All > item on <Factory Default Setting> , all set values will be reset,
and if you click the [ Apply ] button of the < Network status maintain > item, all set values except for
network information will be reset.
3. Click <OK> when the factory default window appears. Product initialization starts.
4. Click <OK> when the system start window appears on the web browser.
J
` Do not disconnect the power
until the factory default settings are restored.
It will take up to 10 minutes to restart and complete the execution of the internal daemon program after product
initialization.
• When the system initialization is completed, previously registered product information should
be deleted from the controller mode speaker or audio server (SPA-S1000), and you must
register if you wish to use the product.
• As the log information will be deleted when the product's system is initialized, please
download it in advance.
Applying Background Images
1. On the Home screen, click <Environment Setting>
➔
<System Management> .
2.
Under <
Background Image
>, press the [ ] button to select an image file, then click the [
Apply
]
button.
3. Click the [ Initialize ] button to apply the initial image.