Hanskamp MultiDos 035-000-000 Series, Инструкция по установке и эксплуатации

Страница: 8 / 30

8 - 30
Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en
MultiDos
EN
Dosing system – Dosiersystem – Systeme de dosage - Doseersysteem
Assembly Container - version
Look for the assembly of the wall - bracket version at page 14.
This manual contains the information for the installation of one pump unit. When you
have two pump units, use exactly the same information to mount the second pump at
the other side of the container.
1. Check that all the parts are present using the item list. The list of materials can be
found in the appendix. (page 27)
Attention! There are no connection materials included to attach the pipe to
the feedstation.
2. Attach the mounting pipe (art.nr.003 - 521 - 000) 1¼ ” (Ø 42,4) to a feed station or
another feeding system.
3. Install the MultiDos container over the pipe (fig. 2)
4. Slide the container fixer band (art.nr. 003 - 538 - 000) over the stand pipe until it
touches the container. Mount the container fixer band so that the container can ’ t
rotate. (fig.4)
Attention! During the assembly of the stand pipe, look for possible clip
danger.
Attention! When the container runs easily on the tube, it should be fixed.
When the container can make multiple rotations it may impair the
operation.
5. Unscrew the 3 Socket screw with flange (art.nr. 003 - 510 - 000) at the outside of the
MultiDos - pump and detach the pump. (fig. 5)
6. Take the PVC hose and cut this to size. This part becomes the delivery hose to the
sprayer.
7. Place the delivery hose (art.nr.001 - 006 - 005) into the hole of the container and
through the pipe (fig. 6A and 6B.) This hose goes to the sprinkler.
Attention! Watch out for minor injuries by sharp objects during the installa-
tion of the hose trough the stand pipe.
Attention! Make sure that the PVC hose keeps its shape during
the mounting of it. Don
’ t pull the tie - wraps too hard, this can
pinch the hose.
8. For nozzle assembly see page 22.
1x pumphose Ø11.5 (HanskampQualityTube) (art. no. 003 - 512 - 000)
1x suction hose = 20 centimetre (PVC hose Ø10x7) (art. no. 003 - 575 - 000)
1x delivery hose = 5 meter (PVC hose Ø10x7)(art.nr.001 - 006 - 005)
3
6B
2
6A
With 2 pumps:
Also drill a hole Ø13 on the other side of the container (diag. 3). Afterwards attach the
extra supplied feed
- through coupling (art. no. 003 - 572 - 000) in the hole and secure this
with a coupling nut (art. no.001 - 886 - 000).
5
4