-
3
-
2、
SAFETY
Please observe the following safety information for your own safety:
2.1 Avoidance of accident
A. Ensure that you operate the equipment with the power source of correct
voltage as provided by your country;
B. Ensure that you comply with the laws of your country on position for
welder’s installation, high-pressure gas, storage of materials and
treatment of rubbish…etc;
C. Ensure that you wear the safety equipment and dress for the protection
of your eyes and skin;
D. Ensure that there is proper ventilation on place of welding to prevent
injury or hurt by smoke and gas exhaustion;
E. Do not open the DOS shell of the welder or use it in open position.
2.2 Prevention from burn and fire
A. Always keep the welder with a distance 30cm away from the wall and
50cm away from any combustible articles;
B. Keep sparks away from tinder or the open holes;
C. Fasten the welder properly with fixed bolts if it is to be installed on high
position for use;
D. Do not weld tubes, hermetic tubes or vessels through which combustion
gas is traveling.
2.3 Usage
A. Always disconnect the welder if the welder is not in use;
B. Do not touch any electrical components in the welder;
C. Do not wear wet or torn gloves when using the welder;
D. Always select correct cables for use with the welder and always ensure
that correct cables are property connected to the welder;
E. Replace all worn cables or wrap the worn cables with insulation tape
for temporary use;
F. Do not place heavy object or any glass of water on the welder. If you
spill water or any liquid into the welder, immediately unplug the welder
and have it checked by a qualified personnel before using it any further;
G. Always ensure that all electrical or ground connection is carried out by
a licensed electrician.
