Hanseatic WQP12-7735T, Руководство пользователя

Страница: 80 / 84

Page EN-38 Troubleshooting table
The dishwashing results are not satisfactory
Problem Possible cause Solution
There are resi-
dues or streaks
on the dishes. The rinse aid is incorrectly dosed. Adjust the dispensed dose (see
‘Adding rinse aid’ on page EN-12).
There is no dishwasher salt. Add dishwasher salt (see ‘Adding
dishwasher salt’ on page EN-13).
The dishwasher salt is clumpy. Stir the dishwasher salt using the
end of a spoon or similar.
The dishes are
not completely
clean. There are food scraps which are
encrusted onto the dishes. Soak dirty dishes prior to washing
the dishes.
The dishes have not been stacked
optimally. Stack the dishes in such a way
that all parts can be reached by the
water jets (see ‘Loading the dish-
washer’ on page EN-15).
You have selected the incorrect
dishwashing programme. Select the correct dishwashing
programme (see ‘Selecting pro-
gramme and starting the pro-
gramme run’ on page EN-21).
The dishwasher detergent is incor-
rectly dosed. Use the correct dosage of dish-
washer detergent (see ‘Pro-
gramme table’ on page EN-19).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not rotate
unhindered. Ensure that no dishes are imped-
ing the motion of the spraying arm.
The nozzles on the spraying arm
are blocked/calcified. Clean the nozzles (see ‘Cleaning
spraying arms and spray nozzles’
on page EN-26).