Hanseatic WQP12-7735T, Руководство пользователя

Страница: 72 / 84

Page EN-30 Installation, connection and initial commissioning
(e)
4. Insert the two mounting brackets (e) into
the front slots on the top of the dishwash-
er so that you can screw the dishwasher
to the worktop subsequently.
(d)
5. Remove the protective films from the side
end profiles (d).
6. Affix the end profiles to the left and right
edges of the dishwasher.
This will prevent a crack being visible be-
tween the dishwasher and the adjacent
kitchen cupboards.
7. Push the dishwasher into the recess.
UP DOWN
(40)
(46)
8. To position the dishwasher so that it is
level, the two front adjustable feet (40)
and the back foot on the appliance can
be adjusted by up to 50 mm.
– The front feet are equipped with slots. In-
sert a screwdriver into one of the slots and
turn the feet to the height required.
– You can adjust the height of the rear adjust-
able foot with the centre adjusting screw.
Use a Phillips-tip screwdriver for this.
9. Check the alignment with a spirit level.
10. Make sure the top edge of the dishwash-
er is level with the bottom edge of the
worktop to prevent it from tipping forward
when you open the door.