Hanseatic WQP12-7735T, Руководство пользователя

Страница: 66 / 84

Page EN-24 Additional options
Selecting the spraying arm(s)
If only one of the two dish racks is loaded, you
should deactivate the spraying arm which you
do not require.
Touch the
sensor (7) until the required
spraying arm appears on the display
– Upper dish rack loaded:
– Lower dish rack loaded:
– Both dish racks loaded:
Delayed start
The programme run normally starts as soon
as you touch the sensor (9). However you
can delay the start of the programme by up
to 24 hours, as desired.
1. Touch the sensor (3) or sensor
(4) until the desired delay time appears
on the display (H01 to H24).
2. Select the desired dishwasher pro-
gramme (see ‘Selecting programme
and starting the programme run’ on
page EN-21).
3. Touch the sensor (9)
The programme run will start as usual after
the delay period has finished.
Functions
You can combine programmes with an addi-
tional function. The additional function must
be selected
before starting the programme
run.
One of the following functions is available for
the programmes
, , and .
– Intensive cleaning. This function allows
you to further improve the cleaning results.
– Extra drying. This function produces an
improved drying result.
To
• activate the function, touch the F sen-
sor (8) until the desired symbol appears
on the display.
• deactivate the function, touch the F sen-
sor until none of the function symbols ap-
pear on the display.
Lock/child safety lock
The dishwasher sensors can be locked, e.g.
for childproofing purposes.
• Touch the sensor (6) until the lock
symbol lights up (locked) or goes out (un-
locked).