
Functions
Page GB-21
Button lock (child lock)
The button lock allows you to secure the ap-
pliance from unwanted use of the buttons.
You cannot activate the button lock if the cy-
cle selector is on ‘Off’.
Start
Pause
Start time
preselection
Spin
Temp.
60°C
Functions
40°C
°C
°
Anti-
crease
Signal
0000
0
(20)
(19)
240
• To activate the button lock, press both
‘Start time preselection’ (19) and ‘An-
ti-crease’ (20) sensor buttons at the same
time for longer than 3 seconds.
Start
Pause
Start time
preselection
Spin
Temp.
60°C
Functions
40°C
°C
°
Anti-
crease
Signal
0000
0
CL
The flashing ‘
CL
’ signal will appear for a few
seconds on the display (3). After that, the pre-
vious signal will be shown.
If you now press any sensor button, or turn
the cycle selector (2), only the flashing signal
‘
CL
’ will appear.
To deactivate the button lock, hold both sen-
sor buttons ‘Start time preselection’ (19) and
‘Anti-crease’ (20) down at the same time until
‘
CL
’ flashes 8 times in a row and the original
signal can be seen on the display once again.