![Hanseatic HKGK 17455 A2IWD Скачать руководство пользователя страница 62](http://html.mh-extra.com/html/hanseatic/hkgk-17455-a2iwd/hkgk-17455-a2iwd_user-manual_594850062.webp)
Start-up
Page GB-26
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer compartment out prior to first use
with a solution made from 100 ml vinegar
and 200 ml water. Then wipe it out with clean
water and dry all of the parts off afterwards.
Electrical connections
WARNING
Risk of electric shock!
Touching live parts may result in se-
vere i
njury or death.
■
Do not operate or continue to oper-
ate the appliance, if
–
it shows visible signs of damage,
e.g. the power cord is defective,
–
it starts smoking or there is a smell
of burning,
–
it makes unfamiliar noises.
In such cases, pull out the mains plug
or unscrew/isolate the fuse and con-
tact our service department (see page
GB-32).
■
Do not connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
■
If the mains plug is no longer acces-
sible after installation, an all-pole dis-
connecting device complying with
overvoltage category III must be
connected to the house wiring with a
contact gap of at least 3 mm; this in-
cludes fuses, circuit breakers and con-
tactors.
■
Do not kink or pinch the mains cord
or lay it over sharp edges. This can re-
sult in a break in the cable.
CAUTION
Fire hazard!
Improper handling of the appliance
can lead to fi re and property damage.
■
Only connect the appliance to a
properly installed and earthed elec-
tric socket. Do not connect to a mul-
ti-socket extension cable or a mul-
ti-socket plug.
NOTICE
Risk of damage!
If the appliance has been transported
horizontally, lubricant from the com-
pressor may make its way into the
cooling circuit.
■
If possible, do not til
t the cooling ap-
plianc
e horizontally.
■
Allow the appliance to stand up-
right for approx. 2 hours after trans-
port and before connecting. This
allows the lubricant enough time to
fl ow back into the compressor.
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).
You will find all important information
about operation from page GB-12.
Содержание HKGK 17455 A2IWD
Страница 72: ......