page EN-25
Dishwasher operation
You can add more dishes even if the dish-
washing programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
1. Open the appliance door slightly.
2. Wait until both spraying arms have come
to a full stop.
3. Slowly open the appliance door all the
way.
4. Add the dishes.
5. Close the door of the appliance.
The appliance continues with the pro-
gramme sequence.
Unloading the dishwasher
CAUTION
Risk of scalding!
Hot steam will emerge when you open
the appliance door.
■
Maintain a sufficient distance from
the appliance door, and do not hold
your head or upper body directly
above the open appliance door.
■
Make sure that children do not open
the appliance door if the programme
has only finished a short time ago.
■
Only open the appliance door slightly to
allow the steam to escape more easily.
■
Allow the dishes to cool before un-
loading the dishwasher.
Risk of injury!
People may trip over the open appli-
ance door.
■
Note that the door should not be left
in the open position since this could
present a tripping hazard.
■
Close the appliance door after every
use.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may damage it.
■
Make sure that children and pets
do not stand on the open appliance
door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher, start
with the lower rack and then unload the
upper rack. This will prevent water drip-
ping onto the lower layer of dishes from
the top layer of dishes.
2. Leave the appliance door open slightly so
that the inside of the appliance can cool
off and dry.
If no further settings are made, the appliance
will automatically switch off after 15 minutes.
