Care and maintenance
Page EN-33
Checking and cleaning the
spraying arms
The nozzles in the spraying arm may cal-
cify or become dirty due to food scraps.
Check the nozzles regularly after each
cycle and clean them if required.
1. Empty both dish racks (19) and (20)
and remove the upper dish rack.
2. Pull the lower dish rack (20) forward
fully so that the lower spraying arm (23)
is accessible.
3. Pull the lower spraying arm up and off.
(36)
4. The upper spraying arm is fastened
with a bayonet lock. To remove the
spraying arm, hold the two serrated
bayonet handles (36) and turn the
spraying arm anti-clockwise.
5. Clean the nozzles under running water.
6. Affix the spraying arm again after clean-
ing.
The spraying arm must be firmly affixed
and must be able to rotate freely.
Complete cleaning
In well-stocked supermarkets and drug-
stores, you will find special dishwasher
cleaning products. Cleaning the appliance
using these products takes place when the
dishwasher is empty and is very intensive.
You should clean the dishwasher in this
way from time to time. When doing so,
please note the manufacturer’s instructions
on the packaging.
To avoid limescale, follow the notices for
proper appliance setting (rinse aid and salt)
(see chapter "Dishwasher detergents, rinse
aids and dishwasher salts”).