
Page EN-28
Dishwasher operation
Dishwasher operation
Before getting started
– Read the "Safety" chapter, particularly
the safety instructions.
– Place and connect the appliance as de-
scribed in the chapter "Set-up, connec-
tion and initial start-up".
– Fill dishwasher detergents, rinse aids
and dishwasher salts or multitabs.
Preparation
1. Open the tap completely.
2. Keep the appliance door closed.
3. Press the button (1) to turn on the
appliance.
You will hear a beep, and the display
and all indicators will illuminate briefly.
Protecting the environment
– The ECO programme is the most effi-
cient programme for cleaning normally
soiled dishes in terms of combined en-
ergy and water consumption.
– If you keep to the specified maximum
capacity when loading your appliance,
and if you arrange the dishes correctly,
energy and water can be saved (see
chapter "Loading the dishwasher").
– Manual pre-rinsing of the dishes leads to
higher water and energy consumption
and is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow
the instructions in the user manual.
Selecting and starting the
dishwashing programme
It is recommended that you carry
out a test run before the first dish-
washer cycle in order to remove
residues from the manufacturing
process and to ensure that the
device is fully functional. Carry out
this test run when the dishwasher
is empty and without any dish-
washer detergent.
1. Select the appropriate rinsing pro-
gramme using the "Programme Table",
see chapter "Programme Table".
2. Close the appliance door and press the
button (1)
3. Press the button (2) until the display
(11) indicates the duration of the de-
sired programme (9).
During the programme cycle, the two
dots between the hours and the
minutes will flash on the display.
4. When the programme is finished, a
beep will sound eight times.
Now turn off the water tap and press
the button to switch off the appliance.
5. Proceed with "Unloading the dish-
washer”.
Delayed start
The rinsing process usually starts immedi-
ately after the button (8) is pressed. If
you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
1. Press the button (3) until the display
(11) indicates the desired delay time
(H:00, H:01 to H:24).
2. After setting the start time, press the
button to start the delayed dishwash-
ing programme.
Additional options
You can combine the various dishwashing
programmes with additional options.
– "Automatic door opening" :
The appliance door opens as soon as
the cycle has reached the drying phase.
– “Extra dry”
:
This option ensures a better drying res-
ult.
– “Quick wash” :