Page EN-12
Set-up, connection and initial start-up
Installing the appliance under a
worktop
90°
600 mm
820–870 mm
100 mm
580 mm
80 mm
90°
Recess dimensions
Area for inflow/
Outflow and electrical
connection.
Feet
adjustable
NOTICE
Risk of damage to property!
Selecting the wrong screws can damage
the worktop.
n
Use the screws which are supplied in
the delivery or screws of an appropri-
ate length.
– Only install the dishwasher underneath
a continuous worktop which is joined to
the cabinets adjacent to the dishwasher.
– Maintain sufficient distance from the
walls and adjacent appliances. The
measurements of the recess must at
least correspond to the details in the dia-
gram above.
Preparing the appliance
1. Switch the fuse off.
2. Remove cardboard, polystyrene and
adhesive strips from the inside of the
appliance, if you have not already done
so.
(31)
3. Glue the enclosed protective film for
condensation water (31) to the under-
side of the worktop. This will prevent
damage to the worktop caused by hot
steam released from inside the dish-
washer when the appliance door is left
open.
(33)